SPI Vision Headlight Tinting Film - 100cm x 50cm Roll

SPI Vision Headlight Tinting Film - 100cm x 50cm Roll

Tinting film suitable for headlights, rear tail lights and side indicators. Unique design gives a tinted effect but light is still allowed to pass through. 1m x 50cm roll should be enough for a set of headlights or a set of rear tail lights. Sold in multiples of 50cm, extra purchases will be sent as a continuous length.

More details

£9.99

             


An exciting new headlight and rear cluster tinting mesh that sticks to the outer surface of any light creating a factory finish dark smoke effect. Waterproof and durable so once applied it can be washed and treated like any other surface on your vehicle. There is no need to remove the light fitting. The film has excellent durability with great resistance to most road and weather conditions. It is manufactured to conform to most light contours and can be installed quickly and if needed removed with little or no adhesive residue.

Please note that high-intensity discharge light bulbs (H.I.D/Xenon) may cause excessive heat build-up under sustained high beam use. This may result in melting of the vinyl. Normally if the high-beam bulb has a silvered tip or a cowling in front of it, then this should be acceptable. If you are fitting this product to headlights, check your headlight configuration before applying. Those light clusters that have a protective coating or lacquer are unsuitable for applying this film. Like many vinyls it may damage this coating when removed. You should check for a protective layer before any installation of the film.

May not be suitable for installation on to non-factory or aftermarket fitted light clusters or where high intensity bulbs have been installed above factory guidelines. You must check before installation that the headlight is suitable.

MOT rules and regulations state:

1.2: Headlights
A pair of headlights must: emit light of substantially the same colour and intensity. emit a steady colour of either white or yellow. be visible from a reasonable distance.

1.3: Brake lights
A brake light must emit a steady red light. At least 50% of the lamp must be visible from the rear Light must be visible from a reasonable distance

1.4: Reflectors
At least 50% of the reflecting surface must be visible from a reasonable distance.

1.5: Indicators
Every indicator must emit amber light. At least 50% of the lamp must be visible. Light must be visible from a reasonable diqstance.

Masks, or converter kits.
A headlamp or rear tail lamp altered in this way is not a reason for MOT rejection. So long as light outputs are not adversely reduced, it emits the appropriate correct colour and the mask is securely attached.

Our window tinting kits come in 5 different levels of darkness; the % means how much light is let though - 5% is a very dark tint and 70% is a very light tint.

5% Limo Tint

VW Caddy Van (5% Limo Tint Rear)

Astra Estate (5% Limo Tint Rear)

Ford Fiesta ST (5% Limo Tint Rear)
Discovery (5% Limo Tint Rear)
Discovery (5% Limo Tint Rear)

20% Dark Smoke Tint

Vauxhall Vectra (20% Dark Smoke Rear)

Honda Civic (20% Dark Smoke Rear)

Freelander 2 (20% Dark Smoke Rear)

Vauxhall Astra (20% Dark Smoke Rear)

35% Light Smoke Tint

BMW 3-Series Coupe (35% Light Smoke Rear)

VW Polo GTI (35% Light Smoke Rear)

Range Rover (35% Light Smoke Rear)

Discovery (35% Light Smoke Rear)

In the UK, you can legally tint the rear windows (rear doors and rear windscreen) as dark as you like.

There are laws for the front door windows which should be no darker than a 70% tint.

We do not recommend window tinting the front windscreen.

Please check your local laws if you are outside the UK.

Our HD fitting videos show you exactly how to install pre-cut window tint:

We also offer free advice if you have any tinting related questions.


Accessories

Subscribe to our latest news and offers
Pay Using PayPal or WorldPay